Padel Tennis Single Court Dimensions and Specifications: A B2B Buying Guide

A padel tennis single court is commonly planned at 6 m wide by 20 m long, giving a playing footprint of approximately 120 m². This narrower format is intended for one-versus-one play, while the widely recognized doubles format is typically 10 m wide by 20 m long. Before placing an order, I recommend confirming the latest rules of the relevant federation, the venue’s planning requirements, and the exact court system proposed by the supplier.

Read more

For procurement, dimensions are only the starting point. I also evaluate the steel or aluminum structure, wire mesh panel geometry, glass or solid wall arrangement, floor levelness, drainage, access for installation, wind exposure, corrosion protection, lighting, and after-sales support. This guide gives B2B buyers a practical framework for comparing single-court specifications and requesting a complete quotation.

Who This Guide Is For

I prepared this guide for sports facility developers, padel club operators, commercial real estate owners, schools, resorts, municipalities, distributors, and contractors sourcing a single padel court. It is also useful for buyers comparing standard modular systems with customized outdoor installations. The recommendations are intended for early-stage planning and supplier evaluation, not as a substitute for local structural, electrical, or building approval.

Understanding the Single Padel Court Format

A padel single court uses the same general playing concept as padel but reduces the court width for individual play. The most frequently specified footprint is 6 m × 20 m, whereas a doubles court is generally 10 m × 20 m. The longer dimension remains important because it affects the glass, fencing, lighting arrangement, service access, and total installation cost.

Buyers should distinguish between the playing area, the structural court envelope, and the recommended site area. A 6 m × 20 m playing footprint does not automatically mean that a site measuring exactly 6 m × 20 m is sufficient. Space may be required for foundations, drainage, maintenance access, spectator circulation, electrical equipment, and safe movement around the court.

The International Padel Federation publishes the official rules and technical requirements used as a key reference for padel court planning. Because rules and venue requirements can change, I advise buyers to verify the current FIP documentation and any national federation requirements before finalizing production drawings.

Core Dimensions and Technical Specifications

The table provides planning values rather than a universal specification. For example, a court may use tempered glass in selected wall sections and welded wire mesh in the upper or side sections. The final arrangement depends on the manufacturer’s design, the selected playing format, local safety rules, and whether the court is intended for indoor or outdoor use.

Net and Playing Geometry

The net must be installed consistently across the court and checked after assembly. A commonly referenced padel net specification places the height at approximately 88 cm in the center and 92 cm at the ends. The exact posts, tensioning system, anchoring method, and net material should be identified in the technical quotation rather than assumed from the court’s overall size.

Glass, Wire Mesh, and Structural Frame

Most modular courts combine impact-resistant glass panels, steel posts, and welded wire mesh or fencing sections. For wire mesh procurement, I recommend specifying the panel dimensions, wire diameter, aperture, panel tolerances, edge treatment, fixing clips, post spacing, and corrosion-protection system. These details affect ball behavior, visual quality, maintenance, and installation time.

Commonly discussed glass thicknesses include 10 mm and 12 mm, but the correct selection depends on the complete panel design, support spacing, safety requirements, and supplier engineering. I do not recommend choosing glass thickness or mesh wire diameter in isolation. The supplier should provide a coordinated assembly drawing showing how the glass, mesh, posts, bolts, base plates, and foundations work together.

For outdoor projects, surface protection is a major purchasing factor. Hot-dip galvanizing, powder coating, or a combined protection system may be specified, but the buyer should request the actual coating process, target coating requirements, color reference, repair method for installation damage, and maintenance instructions. Coating performance depends on preparation, application, environment, and exposure, so I avoid treating one coating label as a guarantee of service life.

Material and Configuration Options

Steel Versus Aluminum Structures

Steel structures are widely used because they can provide substantial rigidity and compatibility with welded mesh panels. Aluminum may reduce weight in some designs, but its suitability depends on structural engineering, connection design, and the intended environment. I compare the complete installed system rather than judging materials only by their nominal weight or price.

Welded Wire Mesh Options

Welded wire mesh can be supplied in different wire diameters, apertures, panel sizes, and finishes. Smaller apertures may improve containment and visual uniformity, while larger apertures can influence material use and airflow. The correct choice should be based on ball containment, player safety, structural loading, appearance, corrosion exposure, and the supplier’s tested or engineered configuration.

Indoor, Outdoor, and Coastal Configurations

Indoor courts usually have fewer weather-related requirements, although ventilation, condensation, drainage around entrances, and building access still matter. Outdoor courts need a more detailed review of wind, rain, ultraviolet exposure, drainage, foundation design, and maintenance access. Coastal or high-humidity sites may require additional corrosion-control measures, but the appropriate system should be confirmed through a project-specific specification rather than assumed.

How to Select the Right Single Court

Step 1: Confirm the Playing Format and Site Envelope

First, confirm whether the project needs a true single format or whether the operator may later want a doubles court. Measure the available land, identify property boundaries, and reserve space for access, foundations, utilities, and circulation. I also check whether construction equipment can reach the site and whether long glass or mesh panels can pass through the building or property entrance.

If you are looking for more details, kindly visit Boya.

Step 2: Define the Operating Environment

Record whether the court will be installed indoors, outdoors, on a roof, near the coast, or in an area with strong seasonal wind. The environment influences the structural review, coating selection, drainage, glass cleaning, and replacement-part requirements. For rooftop or elevated installations, the buyer should obtain advice from a qualified local engineer regarding load capacity and anchoring.

Step 3: Request a Complete Technical Package

A professional quotation should include a dimensioned general arrangement drawing, material list, foundation requirements, glass and mesh specifications, hardware details, coating description, lighting information, packing list, installation scope, and warranty terms. I also request tolerances and replacement-part information for mesh panels, clips, bolts, net components, LED fixtures, and glass seals. This makes supplier quotations easier to compare on an equivalent basis.

Step 4: Compare Total Delivered Cost

The lowest unit price may not represent the lowest project cost. I compare the court kit, packaging, freight, insurance, customs requirements, unloading, civil works, installation labor, electrical work, drainage, lighting controls, spare parts, and future maintenance. For international procurement, the buyer should also clarify the trade term, port or delivery location, documentation, and responsibility for site unloading.

Key Buyer Selection Factors

• Dimensional accuracy: Confirm internal playing dimensions, external frame dimensions, net position, door location, and glass or mesh alignment.
• Structural design: Review post sections, base plates, anchors, connection details, and the suitability of the design for local wind and site conditions.
• Mesh specification: Request wire diameter, aperture, panel size, material grade, weld quality, finish, and fixing details.
• Glass safety: Verify glass type, thickness, edge finishing, support method, and replacement procedure.
• Corrosion protection: Compare galvanizing, powder coating, pretreatment, color, repair method, and maintenance guidance.
• Lighting: Request LED wattage, quantity, mounting position, IP rating, electrical input, controls, and lighting calculation where required.
• Installation: Confirm whether the quotation includes supervision, full installation, foundation work, or only the manufactured court kit.
• Service continuity: Check production capacity, spare-part availability, packing protection, response time, and technical communication.

As a wire mesh manufacturer and supplier, I treat mesh documentation as an essential part of the purchase, not an accessory detail. A clear mesh specification helps prevent substitutions that may change appearance, rigidity, corrosion resistance, or installation compatibility. If the project has a particular aperture, wire diameter, finish, or panel size, I recommend approving a sample or technical drawing before mass production.

Pricing, MOQ, and Lead-Time Considerations

Single-court pricing varies according to structure, glass configuration, mesh specification, lighting, coating, packaging, installation scope, freight distance, and site conditions. I do not recommend using an unsupported “standard price” as a budgeting reference because two courts with the same 6 m × 20 m footprint can have substantially different bills of materials. A reliable quotation should separate the court system from optional items such as lighting, flooring, foundations, installation, and shipping.

Minimum order quantity also depends on whether the buyer is ordering one project court, several courts for a club, or repeat stock for distribution. For a one-court project, suppliers may need to confirm production scheduling, custom color, special mesh, packaging, and spare-part quantities individually. Buyers should request the estimated manufacturing lead time, inspection stage, packing date, shipping window, and validity period of the quotation.

Lead time should be treated as a project schedule rather than a single number. Drawing approval, deposit confirmation, raw-material availability, customization, production, quality inspection, packing, export clearance, and transportation can each affect delivery. I recommend building contingency into the installation plan and obtaining written confirmation of the milestones before booking civil works or opening a venue.

Supplier Evaluation Checklist

1. Request company and factory information relevant to wire mesh and court-component production.
2. Ask for a dimensioned drawing showing the 6 m × 20 m single-court arrangement or the proposed alternative.
3. Confirm the wire mesh material, wire diameter, aperture, panel dimensions, finish, and fixing system.
4. Review glass specifications, structural connections, door design, net system, and foundation requirements.
5. Request photographs or documentation of comparable product configurations without accepting unverified performance claims.
6. Clarify quality inspection, packaging method, replacement parts, warranty exclusions, and technical support.
7. Compare delivered scope, lead time, MOQ, payment terms, shipping responsibilities, and installation support.
8. Obtain local professional review for foundations, electrical work, wind exposure, drainage, and building compliance.

The International Organization for Standardization explains that ISO 9001 is a quality-management-system standard, not a product-performance certificate. Therefore, I recommend examining the actual inspection plan, drawings, material traceability, and corrective-action process instead of relying only on a certification statement. For project compliance, the buyer should also follow the requirements of the local authority and the current applicable padel rules.

Common Procurement Mistakes

One common mistake is ordering a court based only on the playing footprint and forgetting the external envelope and service space. Another is comparing mesh prices without checking aperture, wire diameter, coating, panel tolerances, or fixing hardware. These omissions can create installation problems even when the quoted overall dimensions appear correct.

Buyers also sometimes approve a quotation without defining the installation boundary. A court kit may exclude concrete foundations, drainage, electrical cabling, lifting equipment, flooring, lighting controls, or final alignment. I recommend marking every included and excluded item on the purchase order and reviewing the shop drawing before production begins.

Practical Optimization Advice

For a commercial venue, I suggest designing the procurement package around maintainability as well as initial appearance. Keep a record of mesh panel sizes, coating color, glass dimensions, fastener types, LED specifications, and recommended spare parts. A small stock of compatible clips, bolts, mesh sections, net components, and lighting parts can reduce downtime when a component needs replacement.

Where land is limited, a single court can offer a compact format, but the operator should validate demand and programming before selecting it. If tournaments, doubles bookings, or future expansion are important, the site plan may need to preserve an option for a standard 10 m × 20 m court. I recommend asking the supplier whether the proposed structural and foundation concept can be adapted without replacing the entire system, while recognizing that conversion is design-dependent.

Summary for B2B Buyers

• A typical padel single court is planned at approximately 6 m × 20 m, or 120 m² of playing area.
• The commonly referenced net height is approximately 88 cm at the center and 92 cm at the ends.
• Do not confuse the playing footprint with the total site requirement.
• Evaluate mesh aperture, wire diameter, panel size, coating, fixing hardware, and structural integration together.
• Request drawings, material details, foundation requirements, lighting data, packing information, lead time, and service terms.
• Confirm current federation rules and local structural, electrical, planning, and safety requirements before production.

Conclusion: How to Move Forward

For most B2B planning purposes, the answer is that a padel tennis single court uses an approximately 6 m × 20 m playing footprint, but a successful purchase requires more than ordering those dimensions. I recommend confirming the playing format, surveying the complete site, defining the required glass and wire mesh system, and requesting a detailed technical and commercial quotation. The final design should be reviewed against current padel rules and local construction requirements.

At Boya, I can support buyers with wire mesh specification review, panel and aperture selection, finish coordination, drawing-based quotation, packaging planning, and communication with the wider court-system supplier. Send me the target court dimensions, indoor or outdoor location, quantity, preferred finish, destination country, and installation scope. I can then help prepare a practical mesh and court-component specification for your sourcing review.

Sources

• International Padel Federation (FIP), official rules and technical documentation: padelfip.com
• International Organization for Standardization, ISO 9001 quality management systems: iso.org/iso-9001-quality-management.html

The company is the world’s best Padel Tennis Single supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.